F10 Antiseptic Wound Spray with Insecticide 100ml

Application: In wide ranging field trials covering a wide variety of animal, bird and reptile species the product has demonstrated good healing and antimicrobial action while at the same time was shown to be effective against a variety of insects. Long residual effectiveness was also demonstrated across the disinfecting and insecticidal spectrums. The product is water soluble and can be rinsed clear with water.

Antimicrobial Action: The antimicrobial action of the product is based upon core actives of the F10 compound as used in other F10 antiseptic and disinfectant products. At the concentrations in this product, the efficacy achieved is log5 reduction in microbial counts against gram positive and gram negative bacteria, as well as fungi, yeast and moulds. F10 has proven virucidal effectiveness against both enveloped and non-enveloped viruses.

Ingredients

• Benzalkonium Chloride 
• Polyhexanide    
• Cypermethrin

Guaranteed Analysis

• Benzalkonium Chloride: 0.405g/100ml  
• Polyhexanide: 0.03g/100ml   
• Cypermethrin : 0.25g/100g

• Keep away from naked flames and avoid spraying near open fire as the product is flammable.
• Avoid contact with eyes; if contact occurs, rinse thoroughly with water and seek medical advice if irritation persists.
• Avoid inhaling the spray mist; use in well-ventilated areas.
• Wear gloves during application to prevent skin irritation.
• Do not mix with other chemicals.
• Keep out of reach of children, uninformed persons, and pets.
• This product contains Cypermethrin that is  highly toxic to fish and aquatic life; so it is not to be used for aquatic life . 
• In case of ingestion, do not induce vomiting; give water or milk and seek medical attention immediately.
• Store in the original container, in a cool, well-ventilated place away from direct sunlight.

• Use only as directed and in a well-ventilated area.
• Remove all organic material and clean the wound using an approved irrigating solution such as F10 Antiseptic Solution.
• Hold the bottle approximately 10 cm from the affected area.
• Apply 1 to 2 sprays onto each wound site.
• Do not exceed 2 spray actions per kg of body weight or a maximum of 5 treated areas per animal in a 24-hour period.
• Leave the sprayed area to dry naturally.
• Repeat the application every 4-5 days or as advised by a veterinarian.
• This small animal medication is water soluble and should be reapplied if the animal has been washed or exposed to heavy rain.
• The spray can also be used to treat and prevent fly strike and tick bites with the same application method.