Aquatop MaxFlow PH-8 211 GPH Power Head for Fish Aquariums

The Aquatop Aquarium Power Head MaxFlow PH-8 delivers a robust 211 GPH, ensuring optimal water movement. This small aquarium pump is fully submersible and operates quietly. 

• Made from high-strength, impact-resistant ABS plastic. The power head's design facilitates seamless integration with under-gravel filters and sponge filters. 

GUARANTEED ANALYSIS:

• A drip loop must be used with all electrical aquarium devices. 
• A drip loop is a self-made part of the cord hanging below the receptacle
• A GFCI (Ground Fault Circuit Interrupter) should be used in the branch circuit supplying all power to water pumps and electrical aquarium equipment. If you do not have a GFCI, we strongly recommend having a qualified electrician install one before operating any aquarium component. 
• Do not plug it into an extension cord or power strip. 
• Use this product for its intended purpose only. 
• Never yank or pull the cord from the electrical outlet. 
• Do not operate if the plug or wire is damaged. 
• Verify that the hands are dry before disconnecting the power. 
• To reduce the risk of electrocution, keep all connections dry.
• For indoor use only. 
• If any of the electrical components get wet, unplug immediately. 
• Do not use soaps or detergents when cleaning the exterior surface of this device. 
• Make sure the device is completely dry before connecting. 
• Keep this product away from children.

Note: If you wish to connect the MaxFlow Power Head to an under-gravel filter or a CAF Sponge Filter, remove the Inlet Strainer (Part #6) and install the included Inlet Adapter (Part #8). Then insert the uplift tube from the under-gravel or sponge filter into the Inlet Adapter (PH8/16/22 models only).

• Position the power head in the desired location within the aquarium, ensuring full submersion.
• For under-gravel filtration, attach the power head to the uplift tube securely.
• Connect the air hose and adjust the regulator to achieve the desired aeration.
• Plug the power head into a suitable power source, ensuring a drip loop is formed to prevent water from reaching the outlet.